TB1601-N+UNA5 is an Automatic Spray System for water-based adhesives with Belt Conveyor & Dryer 

• The maximum width of working is 1540 mm (60 in).
• The material is placed on a belt conveyor that moves forward while the spray gun, that applies the adhesive, moves alternatively from right to left.
• The possibility to adjust the time and the advancement speed of the belt conveyor and also the gun speed, permits to obtain a good application of the adhesive.
• The settings of the different cycles are programmed by LCD touch screen.
• The model TB1601-N+UNA5 is equipped with a motor fan unit that blows warm air on the glued materials placed on the back side of the belt conveyor.
• The air temperature is adjustable and may arrive till 70°C.
• The suction unit permits also to reactivate the adhesive for having a better adhesion of the parts.
• The belt conveyor (very easy to change) is realized on polyester fiber with thickness of mm 5.
• The suction under the belt conveyor blocks the pieces during the adhesive spraying phase.
• The suction system, in addition to block the pieces on the conveyor belt, attracts the overspray between the panels placed on the left, right and back sides of the machine.
• The suction system has an aspiration flow of 3.600 cubic meters/hour.