Smoothing Press
Rotary lamination press (nip rolls) used to squeeze an adhesive coated sheet to a substrate.
Can be used to combine sheets that are coated with wet adhesive, or for the lamination of sheets using contact cements or film adhesives
FEATURES
- Fixed lower roller and a floating upper roll
- Roll opening adjustable from touching to 1-½ inches.
- The upper roll is designed to provide enough pressure to squeeze out bubbles,blisters, and wrinkles trapped between the substrates, giving a high quality lamination.
- The pressure between the rolls is created by the weight of the upper roller (2 lbs per linear inch), without excessive pressure that would crush the flutes on corrugated or collapse foamcore board
- Both upper and lower rolls are powered to provide positive pulling force and eliminate any slippage between the layers of the lamination.
- Rolls are covered with urethane rubber for a positive grip and to conform to surface imperfections in the lamination substrates. Rolls can be separated for cleaning or shutdown periods.
- Powered by a D.C. variable speed drive, with a top speed is approximately 60 feet per minute
- Made in USA!
OPTIONS
- Sizes: 18″, 24″, 32″, 45″, 50″, 60″
- Stand with Casters
- Air Cylinder Option – increase the pressure between the rolls up to approximately 500 lbs at 100-psi air pressure. Variable by adjusting the air pressure on the cylinders.