Model TD 90

Strap & Belt Cutting Press
SE Series

Built to cut and punch both ends of synthetic and leather straps at the same time. Great for processing belts, straps, harness, and collars. The TD90 uses hydraulic pressure with electronic controls. It has two independent heads, each with a working area of 12-1/4 x 3-1/2 in. It is possible to adjust the distance between the heads from 24 to 45-1/2 in. (61 to 116cm). The cutting power of each head is 2-3/4 tons. When equipped with a printing unit between the heads, the TD90 cannot only shape both ends, but also print logos and numbers in one cycle. The machine is also equipped with synchronized push button engagement and a photoelectric barrier to comply with current safety regulations. Made in Italy!

Optional Equipment

• Normal Printing Unit: 5-1/8″ x 1-1/8″ (130 x 28 mm)
• Large Printing Unit: 7-1/2″ x 1-1/8″ (190 x 28 mm)

Other Models:

• TD90F: Expanded Photocell Safety Barrier of 12″ (300mm)
• FPA140: Economic Model
• Technical Data:

• External mch. measurements +/-10 mm. (H x L x D): mm. 1600 x 1700 x 600
• Hydraulic unit motor: 2HP (1,5kW)
• Max. cutting-punching working area of each head: mm. 310 x 90
• Max. printing working area: mm. 130 x 28 (with normal printing unit) mm. 190 x 28 (with 200mm. printing unit)
• Max abs. Power (with printing unit): kW 1,9
• Max. printing strength (with 150 bar pressure): 1440 kg (1415 daN)
• Net weight of machine (oil tank full): kg 400 approx.
• Operation: hydraulic and electric
• OPTIONAL: pneumatic device for scrap ejection